Town & Country V6-4.0L (2008)
20. Remove the bolts (3) securing both front crossmember support brackets (1) to the frame rails (2) of the vehicle.
21. Remove all four bolts attaching the front suspension crossmember to the underbody of the vehicle. Remove front crossmember support brackets
upon removal of rear mounting bolts.
CAUTION: Lower the steering gear slowly, paying special attention to the steering gear and fluid hoses. Do not strain or overextend the
hoses because damage to the hoses or connecting hardware may occur.
22. Slowly lower the front suspension crossmember using the transmission jack just enough to allow easy removal of the lower control arm mounting
bolts.
23. Remove the front bolt (1) attaching each lower control arm (2) to the crossmember (4).
24. Remove the rear bolt (3) and nut attaching each lower control arm (2) to the crossmember (4).
25. Separate the lower control arms from the crossmember, then support each lower control arm using a bungee cord or equivalent to keep undue
stress off the ball joints.
26. Lower the front suspension crossmember to working height using the transmission jack.