chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Front Overhead Console|Page 10668 > < Front Overhead Console|Page 10666
Page 6
background image

6. Grasp the overhead console (3) firmly and pull down on the front of the unit to unsnap the front of the console.
7. If equipped with DVD screen, disconnect the electrical connectors (1).

Short Overhead Console - Non Sunroof Equipped

SHORT OVERHEAD CONSOLE - NON SUNROOF EQUIPPED

1. If equipped with DVD screen, connect the electrical connectors (1).
2. Position the overhead console (3) into place over the retaining slots and firmly the front of the console into place.
3. Install the two screws (2) holding the rear of the overhead console (3).

4. Connect the electrical connectors (3) to the reading lamps and rear air (if equipped).
5. Position the overhead console bezel (1) over retaining slots and firmly snap into place.
6. Connect the battery negative cable.

Long Overhead Console

LONG OVERHEAD CONSOLE

1. Position the overhead console (3) in vehicle over retaining slots.
2. If equipped with DVD screen, connect the electrical connectors (1).
3. Firmly snap the overhead console (3) into place to engage the console to the roof retainers.
4. Install the four screws (2) to the overhead console (two in the front and two in the back).

Front Overhead Console|Page 10668 > < Front Overhead Console|Page 10666