Town & Country V6-4.0L (2008)
INSTALLATION
1. Position the sill plate (1) over the retaining slots and firmly snap into place.
2. Close the sliding door.
Door Sill Scuff Plate - Removal
REMOVAL
1. Open front door.
2. Drivers side only - remove the one retaining screw at the umbrella tray.
3. Using a trim stick or equivalent, gently pry up on the door sill trim (1).
Door Sill Scuff Plate - Installation
INSTALLATION
1. Position the door sill trim (1) over the retaining slots and firmly snap into place.
2. Drivers side only - install the one retaining screw at the umbrella tray.
3. Close the front door.
