Town & Country V6-4.0L (2008)
NOTE: Illustration shown with seat back cover and foam removed for clarity.
2. Push the head restraint sleeves (1 and 3) downward until the retaining barbs (4) are fully engaged to the seat back frame (2).
3. Install the plastic seat back coverSee: Seat Back/Service and Repair/Removal and Replacement/Seat Back Cover - Installation.
4. Install the head restraintSee: Headrest - Installation.
2nd Row-Stow -N- Go
INSTALLATION
1. Insert each head restraint sleeve (1) into the top of seat back.
2. Push each head restraint sleeve downward until the sleeves are fully engaged to the seat back.
3. Position head restraint (1) to the seat back.
4. Press lock button (2) on side of the sleeve.
5. Push head restraint down into the seat back.
Third Row Power Folding Seats
