Town & Country V6-4.0L (2008)
1. Remove the 60 percent third row power folding seat,See: Service and Repair/Removal and Replacement/Seat - Removal.
2. Remove the seat cushion and cover assembly to expose the seat cushion pan (2),See: Seat Cushion/Service and Repair/Seat Cushion / Cover -
Removal.
3. Disconnect the module electrical connectors (3).
4. Remove the pushpin retainers (1) securing the module and bracket (4) to the seat pan (2).
5. Remove the third row power folding seat module from the module bracket.
a. Push the module (1) forward to release the retaining tabs (4).
b. Continue to push the module forward to release the mounting knobs (2) from the module bracket (3).
c. Separate the module from the bracket.
Installation
INSTALLATION
1. Position the third row power folding seat module (1) onto the module bracket (3). Ensure the mounting knobs (2) and retaining tabs (4) are aligned
with the appropriate slots in the bracket (3).
2. Push the module into the bracket until the mounting knobs (2) and retaining tabs (4) are fully seated.
3. Position the third row power folding seat module and bracket (4) onto the seat pan (2) and secure with the pushpin retainers (1).
4. Connect the module (4) electrical connector (3).
5. Install the seat cushion and cover assembly,See: Seat Cushion/Service and Repair/Seat Cushion / Cover - Installation.
6. Install the third row power folding seat,See: Service and Repair/Removal and Replacement/Seat - Installation.
7. Perform the third row power folding seat recliner calibration,See: Service and Repair/Procedures/Third Row Power Folding Seat Recliner
Calibration. Verify proper seat operation.
Removal