Town & Country V6-4.0L (2008)
1. Using trim stick C-4755 or equivalent, disengage the retaining tabs that secure the top and sides of the seat back cover (1) to the rear of the seat
back (2).
2. Pull the top of the seat back cover away from the seat back to disengage the two retaining tabs that secure the bottom of the cover to the seat back.
2nd Row Swivel
REMOVAL
1. Using trim stick C-4755 or equivalent, disengage the two push-pin retainers that secure the top of the seat back cover (1) to the rear of the seat
back (2).
2. Pull the top of the seat back cover away from the seat back to disengage the two retaining tabs that secure the bottom of the cover to the seat back.
Bench Seat - Flat Floor
REMOVAL
1. Remove the seat backSee: Seat Back - Removal.
2. Remove the bench seat back panelSee: Seat Back Panel - Removal.
3. Disengage the J-straps that secure the seat back cover to the seat back frame and remove the cover and foam.
Front Seat
INSTALLATION
1. Engage the two retaining tabs that secure the bottom of the seat back cover (1) to the seat back (2).
2. Position the top of the seat back cover to the seat back and engage the retaining tabs that secure both sides and the top of the cover to the seat
back.
2nd Row Swivel