Town & Country V6-4.0L (2008)
NOTE: Care must be taken not to scrape or nick the camshaft journals when installing the camshaft into position.
1. Lubricate camshaft bearing journals, camshaft lobes and camshaft seal with clean engine oil and install camshaft into cylinder head.
2. Install the camshaft thrust plate, using new gasket. Torque fasteners to 28 Nm (250 in. lbs.).
3. Install the rocker arms.
4. Install the cylinder headSee: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Installation.
