Town & Country V6-4.0L (2008)
7. The arrow on top of piston must be pointing toward front of engine and oil squirt hole on connecting rod faces the major thrust (right) side of the
cylinder bore.
8. Tap the piston down in cylinder bore, using a hammer handle. At the same time, guide connecting rod into position on connecting rod journal.
9. Install rod caps. Install cleaned and inspected connecting rod bolts and tighten to 27 Nm (20 ft. lbs.) Plus 1/4 turn.
10. Install the cylinder head(s)See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Installation
11. Install the oil pan.See: Engine Lubrication/Oil Pan/Service and Repair/Engine Oil Pan - Installation
