Town & Country V6-4.0L (2008)
13. Disconnect the fuel supply line (4) at the fuel rail (1).
14. Remove the upper timing belt cover bolts and remove front upper timing belt cover.
Rear Timing Belt Cover
REMOVAL
1. Perform fuel pressure release procedure.See: Cylinder Head Assembly/Fuel Pressure Release/Service and Repair.
2. Disconnect the negative battery cable.
3. Remove timing beltSee: Timing Belt/Service and Repair/Removal and Replacement/Timing Belt & Sprockets - Removal.
4. Remove camshaft sprocketsSee: Timing Belt/Service and Repair/Removal and Replacement/Timing Belt & Sprockets - Removal.
5. Remove rear timing belt cover bolts.
6. Remove the rear cover.
NOTE: The rear timing belt cover has O-rings to seal the water pump passages to cylinder block. Do not reuse the O-rings.
