Town & Country V6-4.0L (2008)
Service Port HVAC: Service and Repair
Removal
REMOVAL
WARNING: Review safety precautions and warnings before performing this procedure See: Service Precautions/Warning and See: Service
Precautions/Caution. Failure to follow the warnings and cautions may result in serious or fatal injury.
NOTE: Typical A/C system service port and refrigerant line shown.
1. Remove the protective cap (1) from the service port (2).
2. Recover the refrigerant from the refrigerant systemSee: Service and Repair/Procedures/Refrigerant System Recovery.
3. Using a Schrader-type valve core tool, remove the valve core (3) from the service port.
4. Install a plug in or tape over the opened service port(s).