Town & Country V6-4.0L (2008)
15. Remove the rear brake line bracket from the rear frame rail and position the bracket, brake line and ABS wire lead out of the way.
16. Disconnect the exhaust system from the four rubber exhaust hanger isolators and position the exhaust system out of the way.
17. Remove the six screws (2 and 3) that secure the underbody lines (1) underneath the vehicle.
18. Rotate and tilt the underbody lines as necessary and remove the lines from the vehicle.
19. Install plugs in, or tape over all the opened refrigerant line fittings and the rear expansion valve ports.
20. If required, place the extension lines and sealing plate (1) on a workbench, remove the nylon retaining clip (4) that secures the suction extension
line (3) to the sealing plate and remove the suction line from the sealing plate.