Town & Country V6-4.0L (2008)
Starter Motor: Service and Repair
Starter Motor - Removal
4.0L
1. Install engine support tool 8534-12 or equivalent.
2. Disconnect and isolate negative battery cable at battery.
3. Remove battery cable nut (3) and battery cable (2) from the solenoid stud (1).
4. Disconnect electrical connector (4) from solenoid.
5. Remove transmission to starter mounting bolt (4).
6. Support the engine/transmission assemblies with a jack stand or equivalent.
7. Remove two front transmission mount to starter mounting bolts (3).
8. Remove starter assembly (6) from transmission (5).
9. Rotate starter assembly (6) to allow removal from vehicle.
10. Remove starter motor bushing (1).
11. Remove starter motor dust shield (2).
