Front Steering Knuckle Removal for Town & Country V6-40L (2008)
7. Disconnect vehicle wiring harness (1) from wheel speed sensor connector.
8. Unclip wheel speed sensor connector from bracket (2) on frame rail.
9. Remove screw (1) fastening wheel speed sensor routing bracket (3) to mounting flange (2) on strut.
10. Remove screw (3) fastening wheel speed sensor routing bracket (2) to knuckle.
11. Remove nut (1) attaching outer tie rod (5) to steering knuckle (2) by holding outer tie rod stud stationary while loosening and removing nut with a
wrench.
