Town & Country V6-4.0L (2008)
19. Attach the stabilizer bar link (1) at each end of the stabilizer bar (3). At each link, install and tighten the nut (2) while holding the stabilizer bar
link lower stud stationary. Tighten the nuts to 88 Nm (65 ft. lbs.).
20. On each side of vehicle, install tire and wheel assembly (1)See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels
- Installation. Install and tighten wheel mounting nuts (3) in proper sequence to 135 Nm (100 ft. lbs.).
21. Lower vehicle.
22. Connect negative (-) battery cable on negative battery post.
23. Remove steering wheel holder.
24. Fill and bleed power steering system.See: Power Steering/Power Steering Bleeding/Service and Repair
25. Inspect for leaks.
26. Perform wheel alignment, setting toe to specifications.See: Alignment/Service and Repair
