Town & Country V6-4.0L (2008)
9. Place the front crossmember support brackets (1) over the crossmember rear bushings and frame rail (2). Install, but do not tighten mounting bolts
(3).
10. Install all four crossmember mounting bolts (2), but do not tighten at this time.
11. Using a soft face hammer, tap the front suspension crossmember (1) back-and-forth or side-to-side until it is aligned with the previously made
location marks on the vehicle underbody. Once the front suspension crossmember is correctly positioned, tighten all four crossmember mounting
bolts (2) to 163 Nm (120 ft. lbs.).
12. Tighten the mounting bolts (3) for each front crossmember support bracket (1) to 54 Nm (40 ft. lbs.).
13. Remove the transmission jack from under front suspension crossmember.
14. Position the left front brake flex hose bracket on the frame rail and install the mounting screw.
