Town & Country V6-4.0L (2008)
Lateral Stabilizer Rod: Service and Repair
Installation
INSTALLATION
1. Position track bar in mounting brackets, then install bolt (1) and nut securing track bar (2) to frame mounted bracket (5). Do not tighten at this
time.
2. Install bolt (3) and nut securing track bar (2) to axle (4). Do not tighten at this time.
3. Remove jack from under axle.
4. Lower vehicle.
5. Position vehicle on alignment rack/drive-on lift. Raise lift as necessary to access the rear suspension while keeping vehicle at curb (riding) height.
6. Tighten track bar mounting bolt nuts to 81 Nm (60 ft. lbs.).