Town & Country V6-4.0L (2008)
1. Install the sliding door glass (2) into the window opening. Make sure the glass is properly positioned within the glass run.
NOTE: Illustration shown with carrier plate removed for clarity.
2. Working through the close-out plugs in the door module assembly, carefully engage the sliding door glass into the two plastic liftplates (3) located
on the window regulator and secure glass attach nuts.
3. Rotate lower glass channel into position and secure two attach bolts.
4. Install the close-out plugs onto the door module assembly.
5. Install the door trim panel.See: Body and Frame/Doors, Hood and Trunk/Doors/Sliding Door/Sliding Door Interior Trim Panel/Service and
Repair/Sliding Door Trim Panel/Installation.
6. Install the appliques.
