Town & Country AWD V6-3.8L VIN L (2003)
1. Disconnect and isolate the battery negative cable.
2. Remove the A-pillar trim.
3. Remove instrument panel top pad.
Fig.14 Instrument Panel Speaker
4. Remove speaker screws.
5. Disconnect wire harness connector and remove speaker.
Quarter Panel Speaker
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick, gently pry speaker grill from trim panel.
Fig.15 Quarter Panel Speaker
3. Remove speaker retaining screws.
4. Disconnect wire harness connector and remove speaker.
INSTALLATION
D-Pillar Speaker
1. Connect the wire harness connector to the speaker.
2. Slide the speaker into the retainer.
3. Install quarter panel trim.
4. Install upper seat belt bolt (right side).
5. Install liftgate scuff plate.
6. Install rear header trim (right side).
