Town & Country AWD V6-3.8L VIN L (2003)
Arm Rest: Service and Repair
Armrest
ARMREST
REMOVAL
Fig. 13
1. Using a small flat blade, pry cap from side of armrest (Fig. 13).
2. Remove bolt attaching armrest to seat back.
3. Remove armrest from seat back.
INSTALLATION
1. Place armrest in position on seat back.
2. Install bolt attaching armrest to seat back. Tighten bolt to 29 N.m (21 ft.lbs.) torque.
3. Install side cap into the side of the armrest.