Town & Country AWD V6-3.8L VIN L (2003)
Parking Brake Cable: Service and Repair
Front Parking Brake Cable
REMOVAL - PARKING BRAKE CABLE (FRONT)
1. Raise vehicle on jack stands or centered on a hoist.
2. Manually release the automatic self-adjusting mechanism tension of the parking brake lever (pedal) assembly.
3. Remove the intermediate and left rear park brake cable from the park brake cable equalizer.
4. Remove the front park cable housing retainer from body outrigger bracket. Cable is removable by sliding a 14 mm box wrench over cable retainer
and compressing the three retaining fingers. Alternate method is to use an aircraft type hose clamp and screwdriver.
5. Lower vehicle.
6. Remove the left front door sill molding.
7. Remove the left front kick panel for access to the park brake cable and park brake pedal assembly.
