Town & Country AWD V6-3.8L VIN L (2003)
Parking Brake Cable: Service and Repair
Rear Parking Brake Cable
Left Rear Cable
REMOVAL - PARKING BRAKE CABLE (LEFT REAR)
1. Raise vehicle on jackstands or centered on a hoist.
2. Remove rear tire and wheel assembly.
3. Remove rear brake drum from the rear wheel of the vehicle requiring service to the rear park brake cable.
4. Create slack in rear park brake cables by locking out the automatic adjuster as described here. Grasp an exposed section of front park brake cable
near the equalizer and pull down on it. Then install a pair of locking pliers on the cable just rearward of the second body outrigger bracket.
5. Disconnect the left rear parking brake cable from the parking brake cable equalizer.
