Town & Country AWD V6-3.8L VIN L (2003)
Fig.1 Overhead Outlet
REMOVAL
1. Using a trim stick or another suitable wide flat-bladed tool, gently pry the thumb wheel end of the overhead outlet away from the pivot pin in the
headliner bezel until one end of the outlet is released.
2. Pull the opposite end of the overhead outlet away from its pivot pin in the headliner bezel until that end of the outlet is released.
3. Remove the overhead outlet from the opening in the headliner bezel.
INSTALLATION
1. Position the overhead outlet into the opening in the headliner bezel.
2. Slide the non-thumb wheel end of the outlet onto the pivot pin in the headliner bezel. Using hand pressure, push the thumb wheel end outboard
onto the pivot pin until it fully seats.
