Town & Country AWD V6-3.8L VIN L (2003)
Fig.10 Distribution Housing Hooks
8. Pull the top of the distribution housing away from the evaporator housing far enough to disengage the two hook formations on the bottom of the
distribution housing from the two receptacles on the evaporator housing.
9. Remove the two screws that secure the upper intake air housing to the lower intake air housing.
10. Remove the three screws that secure the upper intake air housing to the top of the outboard end of the evaporator housing. Be certain not to miss
the screw located just inside the inboard side of the fresh air intake opening.
Fig.11 Upper Intake Air Housing
11. Remove the upper intake air housing from the top of the evaporator housing to expose the recirculation air door and the blower wheel housing.
12. Remove the two screws that secure the upper half of the recirculation air door to the lower half of the door.
