Town & Country AWD V6-3.8L VIN L (2003)
Center Mounted Brake Lamp: Service and Repair
Center High Mounted Stop Lamp Unit (CHMSL) Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig.5 CHMSL
2. Remove the two retaining screws.
3. Disconnect the rear window washer hose.
Fig.6 CHMSL Bulb
4. Remove bulb socket from lamp unit.
INSTALLATION
1. Install bulb socket to lamp unit.
2. Reconnect the rear window washer hose.
3. Install the retaining screws.
4. Reconnect the battery negative cable.
