Town & Country AWD V6-3.8L VIN L (2003)
Leak Detection Pump: Service and Repair
Leak Detection Pump, Evaporative System
REMOVAL
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
Fig. 7 LDP Location
3. Remove 3 hoses.
Fig. 8 LDP Removal/Installation
4. Remove the electrical connector.
5. Remove the 3 screws and remove LDP pump.
INSTALLATION
1. Install LDP.
2. Install the 3 screws and tighten.
3. Install the electrical connector.
