chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Headlamp Switch > < Left B-Pillar Switch Replacement|Page 1205
Page 1
background image

Glove Box Lamp Switch: Service and Repair

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Open glove box door.

Fig.2 Glove Box Lamp/Switch

3. Push switch through from behind.
4. Disconnect wire harness from switch.
5. Pull bulb from switch.

INSTALLATION

1. Push bulb into switch.
2. Connect wire harness to switch.
3. Push switch into instrument panel.
4. Close glove box door.
5. Reconnect the battery negative cable.

Headlamp Switch > < Left B-Pillar Switch Replacement|Page 1205