chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Steering Gear > < Steering - Steering Column Pop/Tick/Creak Noise|Page 6823
Page 6
background image

32.

Install the new jacket clamp bracket, p/n 04690101, and tighten the screws to 10.2 Nm (90 in. lbs.) (Fig. 4).

33.

Install the steering column opening cover.

34.

Install the upper and lower steering column shrouds.

35.

Connect negative battery cable and close the hood.

NOTE:

In the interest of customer satisfaction, reset the clock when the procedure is complete.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

Steering Gear > < Steering - Steering Column Pop/Tick/Creak Noise|Page 6823