Town & Country AWD V6-3.8L VIN L (2003)
Fluid - Differential: Service and Repair
Overrunning Clutch Housing Fluid Change
STANDARD PROCEDURE - OVERRUNNING CLUTCH HOUSING FLUID CHANGE
1. Raise vehicle on hoist.
2. Position a drain pan under overrunning clutch housing drain plug.
3. Remove overrunning clutch housing drain plug and drain fluid (Fig. 43).
4. Install the drain plug and torque to 30 Nm (22 ft. lbs.).
5. Re-position the drain pan under the overrunning clutch housing fill plug.
6. Remove fill plug (Fig. 44).
