Town & Country AWD V6-3.8L VIN L (2003)
10. Tighten nut on crimping tool C-4975-A until jaws on tool are closed completely together, face to face (Fig. 34).
11. Install the half shaft requiring boot replacement back on the vehicle.
CV Joint Bearing Shield
FRONT AXLE
Outer CV Joint Bearing Shield
REMOVAL
1. Clamp half shaft in a vise by the interconnecting shaft.
2. Using a drift (Fig. 35) tap around the entire edge of the bearing shield until it is removed from the outer CV joint.
INSTALLATION
1. Install bearing shield by hand on outer CV Joint so that it is installed squarely on the CV joint.
