Town & Country LWB AWD V6-3.8L VIN L (2000)
Sliding Door Interior Trim Panel: Service and Repair
Trim Panel
TRIM PANEL
REMOVAL
1. Remove sliding door upper frame molding.
2. If removing the left sliding door trim panel, remove screw from inside ash receiver bezel.
3. Remove screw from pull cup.
Fig. 25
4. Disengage push-in fasteners holding trim to door panel around perimeter and upper edge of door (Fig. 25).
5. Remove sliding door trim panel from vehicle.
INSTALLATION
1. Place sliding door trim panel in position on vehicle.
2. Align locating pins on backside of trim panel to mating holes in the inner door panel.