Town & Country LWB AWD V6-3.8L VIN L (2000)
Sliding Door Striker: Service and Repair
Rear Latch Striker
REAR LATCH STRIKER
REMOVAL
1. Open sliding door.
2. Mark outline of striker on C-pillar door jamb face to aid installation.
Fig. 13
3. Remove screws attaching striker to C-pillar (Fig. 13).
4. Remove striker from vehicle.
INSTALLATION
1. Place striker in position on vehicle.
2. Align striker to outline marks on C-pillar.
3. Install screws attaching striker to C-pillar. Tighten screws to 28 N.m (21 ft.lbs.) torque.
4. Verify sliding door alignment and operation.