chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Procedures|Page 5976 > < Procedures|Page 5974
Page 6
background image

1. Place lower console in position.
2. Slide console forward around instrument panel supports.
3. Install screws to hold lower console to floor bracket and instrument panel.

Overhead Console  Replacement

REMOVAL

Negative Battery Cable

1. Disconnect and isolate the battery negative cable.

Overhead Console

2. Open the transmitter bin door.
3. Remove screw holding the overhead console to the headliner. With the screw removed the console is retained by one engagement tab located

inside the eyeglass storage bin.

4. Open the eyeglass bin door.
5. Press the retaining tab which is located directly above the door latch.
6. Lower rear of console away from headliner.
7. Pull console rearward to disengage clips holding front of console to roof armature and lower con

Procedures|Page 5976 > < Procedures|Page 5974