Town & Country LWB AWD V6-3.8L VIN L (2000)
Console: Removal and Replacement
Floor Console Tray
FLOOR CONSOLE TRAY
REMOVAL
1. Remove the floor console. Refer to the Owner's Manual for proper procedures.
2. Remove the four screws and remove the tray.
INSTALLATION
1. Install the floor console tray and install the screws.
2. Install the floor console. Refer to the Owner's Manual for proper procedures.
Floor Console Tray - Bracket Assembly
FLOOR CONSOLE TRAY - BRACKET ASSEMBLY
REMOVAL
1. Remove the floor carpet.
2. Disconnect the electrical connector.
3. Remove the four screws and remove the bracket assembly.
INSTALLATION
1. Install the bracket assembly and install the four screws.
2. Connect the electrical connector.
3. Install the floor carpet.
Lower Console
LOWER CONSOLE
REMOVAL
1. Remove screws holding the lower console to floor bracket and instrument panel.
2. Slide lower console rearward from around instrument panel supports.
3. Disconnect the auxiliary power outlet wire connector (if equipped).
4. Remove lower console from vehicle.
INSTALLATION
1. Connect the auxiliary power outlet wire connector (if equipped).
2. Install the lower console into the vehicle.
3. Slide console forward around instrument panel supports.
4. Install the screws holding lower console to floor bracket and instrument panel.