Town & Country LWB AWD V6-3.8L VIN L (2000)
8. Install the wheel and tire assembly.
9. Tighten the wheel mounting stud nuts in proper sequence until all nuts are torqued to half specification. Then repeat the tightening sequence to the
full specified torque of 129 Nm (95 ft. lbs.).
10. Remove jackstands or lower hoist.
CAUTION: Before moving vehicle, pump the brake pedal several times to insure the vehicle has a firm brake pedal to adequately stop the
vehicle.
11. Road test the vehicle and make several stops to wear off any foreign material on the brakes and to seat the brake shoe linings.
