chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

A/C Control Head Recirculation Programming Service|Page 5008 > < A/C Control Head Recirculation Programming Service|Page 5006
Page 1
background image

Control Assembly: Service and Repair
Rear Heater-A/C Control Illumination Bulb Replacement

REMOVAL

1. Remove rear heater-A/C control from trim panel.
2. On the back of control opposite from the wire connectors, locate the bulb socket lug.
3. Rotate the socket counterclockwise and pull the socket from the control.

INSTALLATION

For installation, reverse the above procedures.

A/C Control Head Recirculation Programming Service|Page 5008 > < A/C Control Head Recirculation Programming Service|Page 5006