Town & Country LWB AWD V6-3.8L VIN L (2000)
Fog/Driving Lamp Bulb: Service and Repair
REMOVAL
Fog Lamp Bulb
1. Reach behind fascia and remove bulb by rotating counterclockwise.
2. Disconnect the wire connector from fog lamp bulb base.
3. Replace bulb.
INSTALLATION
CAUTION: Do not touch the glass of halogen bulbs with fingers or other oily surfaces, reduced bulb life will result.
1. Connect wire connector into fog lamp bulb base.
2. Insert bulb into fog lamp housing.
3. Rotate lamp bulb clockwise to engage bulb.
4. Verify bulb operation.
5. Verify fog lamp alignment.