Town & Country LWB AWD V6-3.8L VIN L (2000)
INSTALLATION
For installation, reverse the above procedures. Do not connect battery negative cable. Refer to Diagnosis and Testing for Airbag System Test
procedures.
UNDEPLOYED MODULE
REMOVAL
Airbag / Horn Switch
1. Remove screws attaching airbag/horn switch to steering wheel.
2. Remove Driver Airbag Module from steering wheel.
3. Disconnect wire connectors from airbag module, horn switch, and speed control switches, if equipped.
4. Remove screws holding vehicle speed control switches to airbag cover and remove.
INSTALLATION
For installation, reverse the above procedures and do not connect battery negative cable. Do not connect battery negative cable. Refer to Diagnosis
and Testing for Airbag System Test procedures.
