Town & Country LWB AWD V6-3.8L VIN L (2000)
allowable tolerance of 1.2 mm (0.047 inch).
4. Install the routing brackets attaching the speed sensor cable and brake tube to the rear axle. The rear wheel speed sensor cable should be routed
under the rear brake tube.
CAUTION: When installing rear wheel speed sensor cable in the routing clips on rear brake flex hose, be sure not to damage the routing clips.
Routing clips are molded onto the hose and will require replacement of the brake flex hose if damaged during installation of the wheel speed
sensor cable.
5. Install speed sensor cable into routing clips on rear brake flex hose.
CAUTION: The wheel speed sensor cable connectors for the left and right rear wheel speed sensors are keyed differently. Therefore, when
connecting a wheel speed sensor cable to the vehicle wiring harness, do not force the connectors together. If the connectors are forced together,
damage to the connectors will occur.
6. Plug speed sensor cable connector into vehicle wiring harness. Be sure speed sensor cable connector is fully seated and locked into vehicle wiring
harness connector.
7. Install the speed sensor cable grommet into the body, being sure the grommet is fully seated into the body hole.
8. Install the tire and wheel assembly on vehicle.
9. Road test vehicle to ensure proper operation of the base and ABS braking systems.
