Town & Country LWB AWD V6-3.8L VIN L (2000)
2. Place the shock absorber upper mounting eye in the Receiver so the notch in the Receiver clears the shock absorber body.
3. Position the bushing between the shock absorber eye and the Driver. Tighten the screw drive until the Driver, bushing, and shock absorber eye are
touching and squarely aligned.
4. Press the bushing into the shock absorber eye until the Driver bottoms against the face of the eye.
5. Back off the Ball Joint Press screw drive and remove the shock absorber from the press.
6. Install the shock absorber on the vehicle.
