Town & Country LWB AWD V6-3.8L VIN L (2000)
Fig. 49
(6) Hold the torque shaft from turning. Remove viscous coupler retaining nut (Fig. 49).
Fig. 50
(7) Slide coupler off torque shaft (Fig. 50).
INSTALLATION
(1) Slide viscous coupler onto torque shaft.
(2) Install a thin 1-1/4 inch open-end (Snap-On LTA4042 or equivalent) wrench onto the flats of the torque shaft. Install NEW viscous coupler
retaining nut. Tighten retaining nut to 244 Nm (180 ft. lbs.).
(3) Detach the propeller shaft from support strap.
(4) Position propeller shaft at the reference marks.
