Town & Country LWB AWD V6-3.8L VIN L (2000)
Torque Tube: Service and Repair
TORQUE TUBE
(1) Remove rear drive line module assembly from vehicle.
(2) Remove viscous coupling.
Fig. 90
(3) Remove snap ring and torque tube bearing shield (Fig. 90).
CAUTION: Note the position that the snap ring was removed. The snap ring can be accidentally installed backwards. The snap ring is concave
and the fingers on the snap ring must angle towards the bearing shield.
Fig. 91
(4) Remove torque tube to overrunning clutch case bolts (Fig. 91).
(5) Slide torque tube off of torque shaft.
FRONT BEARING
The rear drive line module must be removed to service this bearing.
(1) Remove rear drive line module assembly from vehicle.
(2) Remove viscous coupling.
