Town & Country LWB AWD V6-3.8L VIN L (2000)
(6) Separate overrunning clutch case from differential carrier case.
(7) Remove overrunning clutch inner race snap ring.
(8) Slide overrunning clutch inner race off of shaft.
(9) Remove shaft snap ring and slide dog clutch off of the shaft.
(10) Remove torque shaft rear bearing inner snap ring.
(11) Remove torque tube retaining bolts.
(12) Separate overrunning clutch case from torque tube.
Fig. 98
(13) Remove rear bearing retaining snap ring in overrunning clutch case (Fig. 98).
(14) Remove rear torque shaft bearing.
(15) To install, reverse removal procedure.
