Town & Country LWB AWD V6-3.8L VIN L (2000)
Front Door Window Regulator: Removal and Replacement
WINDOW REGULATOR
REMOVAL
1. Remove the watershield. Refer to Front Door Panel.
Fig. 16
2. Remove door glass retaining clips and secure the window in the up position using masking tape or equivalent (Fig. 16).
3. Disconnect wire connector from power window motor, if equipped.
Fig. 17
4. Loosen screws attaching front and rear window guide rails to inner door panel (Fig. 17).
5. Remove screw heads on guide rails from key hole slots in inner door panel.