Town & Country LWB FWD V6-3.3L VIN G Flex Fuel (1999)
Brake Pad: Service and Repair
Rear
Removal and Installation
NOTE: Before proceeding with this procedure, review Service Precautions.
REMOVAL
1. Raise vehicle on jackstands or centered on a hoist.
2. Remove rear wheel and tire assemblies from vehicle.
Caliper Guide Pin Bolts
3. Remove the caliper to adapter guide pin bolts.
Removing/Installing Caliper
4. Remove rear caliper from adapter using the following procedure. First rotate rear of caliper up from the adapter. Then pull the front of the caliper
and the outboard anti-rattle clip out from under the front abutment on the adapter.