Town & Country LWB FWD V6-3.3L VIN G Flex Fuel (1999)
Right Rear Speed Sensor Cable Routing
5. If removing the right rear speed sensor cable, remove the speed sensor cable grommet from the axle flange, the brake tube clip and the routing clip
from the track bar bracket on the axle.
Rear Speed Sensor Routing Brackets And Clips
6. Remove the 2 rear wheel speed sensor cable/brake tube routing clips. Then unclip the speed sensor cable from the routing clips on rear brake tube.
CAUTION: If the speed sensor has seized, due to corrosion, do not use pliers on speed sensor head in an attempt to remove it. Use a hammer and
a punch and tap edge of sensor, rocking the sensor from side to side until free.