Town & Country LWB FWD V6-3.3L VIN G Flex Fuel (1999)
Fuel Level Sensor: Service and Repair
REMOVAL
Remove fuel pump module. Refer to Fuel Pump Module.
Fuel Pump/Level Sensor Electrical Connector
1. Depress retaining tab and remove the fuel pump/level sensor connector from the BOTTOM of the fuel pump module electrical connector.
NOTE: The pump module harness on TOP of flange is not serviceable or removable.
Wire Terminal Locking Wedge
2. Pull off blue locking wedge.
Wire Terminal Locking Finger
3. Using a small screwdriver lift locking finger away from terminal and push terminal out of connector.