Town & Country LWB FWD V6-3.3L VIN G Flex Fuel (1999)
Power Door Lock Switch: Testing and Inspection
1. Remove door lock/power window switch bezel assembly from door. Refer to Power Door Lock Switch Replacement.
2. Disconnect wire connector from back of door lock switch.
3. Depress switch to LOCK position.
Door Lock Switch
Door Lock Switch Test
4. Using an ohmmeter, test switch resistance between Pins 2 and 3. Refer to Door Lock Switch Test.
5. Depress switch to UNLOCK position.
6. Test resistance between Pins 2 and 3.
7. If resistance values are not within the parameters shown replace the door lock switch.