Town & Country LWB FWD V6-3.3L VIN G Flex Fuel (1999)
8. Remove nut attaching outer tie rod end to steering knuckle. Nut is to be removed from tie rod end using the following procedure, hold tie rod end
stud with a 11/32 socket while loosening and removing nut with wrench.
Tie Rod End Removal From Steering Knuckle
9. Remove both tie rod ends from steering knuckles, using Puller Special Tool MB-990635 or MB-991113.
HCU Bracket Attaching Bolts
10. Remove the 2 bolts and loosen the third attaching the antilock brakes hydraulic control unit (HCU) to the front suspension cradle. Then rotate the
HCU rearward to allow access to the cradle plate attaching nut and bolt just forward of the HCU.