Town & Country LWB FWD V6-3.3L VIN G Flex Fuel (1999)
Wiper Motor: Service and Repair
Replacement
REMOVAL
1. Remove wiper unit from vehicle. Refer to Wiper Unit Replacement.
2. Remove wiper linkage and motor mount plate from wiper unit.
Wiper Motor Connector
3. Disconnect wire connectors from back of wiper motor.
4. Remove wiper linkage from motor crank. Do NOT remove crank from motor.
Wiper Motor Crank
Wiper Motor
5. Remove bolts holding wiper motor to mount plate and remove motor.
INSTALLATION
1. Place wiper unit on a suitable work surface.
2. Place wiper motor in position on mount plate.
