Town & Country LWB FWD V6-3.8L VIN L (1999)
Fluid Level Sensor Electrical Connection
11. Remove wiring harness connector from brake fluid level sensor in master cylinder fluid reservoir.
12. Clean the area where the master cylinder assembly attaches to the power brake booster. Use only a solvent such as Mopar Brake Parts Cleaner or
an equivalent.
Master Cylinder Attachment To Vacuum Booster
13. Remove clip, attaching drain hose for wiper module to brake tube at master cylinder. Remove drain hose from wiper module. Remove the 2 nuts,
attaching the master cylinder to the vacuum booster.
NOTE: It is not necessary to remove the brake tubes from the master cylinder when removing the master cylinder from the vacuum booster.
14. Remove master cylinder and brake tubes as an assembly from the vacuum booster. When master cylinder is removed, lay it out of the way on top
of the left motor mount.
